1. Aurora 80RGB.json
Aurora 80 matte version.json
This is the keyboard import json file, which needs to be imported into QMK
2. Aurora 80 RGB version QMK driver firmware.bin
3. Aurora 80 matte version QMK firmware.bin
This file is the keyboard firmware file. You need to upgrade the keyboard according to the following steps. After the keyboard upgrade is completed, you can use the keyboard driver. The keyboard driver has the latest music rhythm mode.

1. Turn off the battery switch under caps
2. Press esc to plug in the cable
3. Open My Computer and there will be an extra USB folder
4. Put the (Aurora 80QMK driver firmware.bin) file into the newly popped-up USB drive in the system and wait (no light and RGB must correspond! Be careful not to make a mistake)
5. The light flashes three times to complete the upgrade

qmk web driver URL: https://www.caniusevia.com/

Connection steps
1. Go to https://pmokeys.com/software-firmware/ to download Aurora80 related ison files.
2. Enter the VIA official website: https://www.caniusevia.com/
3. Click "Try Now" in the upper left menu or "Start Now" in the lower left to enter the main interface
4. Click the SETTINGS icon in the upper right, and open "Show Design Tab" in the menu
5. Click the DESIGN icon in the upper right, and click "LOAD" on the right side of Load Draft Defnition below. In the pop-up box, open and import the json file (need to select the corresponding json according to the keyboard configuration/connection method)
6. Click the CONFIGURE icon in the upper left, and click "Authorize device +" below. Select the device "Aurora 80/Aurora 80 RGB" in the pop-up box and click "Connect"
7. Return to the CONFIGURE page, you can see that via has recognized the keyboard, and you can change the key